Transcript
Model 1621-02A
S-Type Load Cell
For Automotive Component & System Performance Testing
Highlights
I I
500% FS overload protection Detachable cable with an industry standard 6-pin PT style connector Extremely rugged stainless steel housing Tension and compression measurement range of 1k lb (4.45 kN) Operating temperature range from -65 to +200 °F (-54 to +93 °C) Overall accuracy 0.07% of rated capacity Cost-effective way to measure both compression & tension forces
I I
I
I I
Applications
I
Automotive - Structural Performance Testing on Systems such as: • Doors • Hoods • Trunks
- Life Cycle Testing on Components
such as: • Hinges, Latches & Handles • Bushings and Springs • Seat Backs
I
Other Applications: - Weighing - Material Testing - Tensile Test Machines - Assembly Forces
PCB® Model 1621-02A S-Type Load Cell sensor is designed for precision measurement in multi-cycle, high repetition automotive component and system test applications. Housed in stainless steel, this extremely rugged sensor offers a measurement range of 1,000 lb (4.45 kN); 500% full scale overload protection in both compression and tension; and a 6pin PT style connector. With an operating temperature range from -65 to +200 °F (-54 to +93 °C) and overall accuracy of 0.07%, this sensor is engineered to ensure high repeatability and over-range protection, and is an extremely cost-effective way to measure both compression and tension forces. The detachable cable ensures easy set-up and minimizes down time due to damaged cables, and the available mounting accessories make this a versatile sensor for any test environment. As with all PCB® instrumentation, these sensors are complemented with toll-free applications assistance, 24-hour customer service, and are backed by a no-risk policy that guarantees total customer satisfaction or your money refunded.
Model 1621-02A
Automotive Sensors Division
Toll-Free in USA 888-684-0014
716-684-0001
www.pcb.com
Model 1621-02A
Model 1621-02A
Performance
Measurement Range (Full Scale Capacity) Sensitivity (± 10%) ( output at rated capacity) Non-Linearity Hysteresis Non-Repeatability Creep (in 20 minutes) 1000 lb 4.45 kN 2 mV/V ≤ 0.05% FS ≤ 0.05% FS ≤ 0.02% FS ≤ 0.3% 5000 lb 22.3 kN 250 lb 1.3 kN 700 in-lb 79 N-m 700 in-lb 79 N-m -65 to +200 °F -54 to +93 °C +70 to +170 °F +21 to +77 °C ± 0.008% / °F ± 0.0014% / °C ± 0.0015% FS / °F ± 0.027% FS / °C 350 ohm 10 VDC > 5 x 109 ohm ≤ 1% FS 2.25 x 1.00 x 2.75 in 5.72 x 25.4 x 69.9 mm 0.454 kg 1/2 - 20 Thread .01 in 0.254 mm Strain Gage Stainless Steel PT02E-10-6P Side
Recommended Signal Conditioners for Model 162102A S-Type Gage Load Cell 8159 Series:
Operates from 115 or 230 VAC power, provides 5 or 10 VDC strain gauge bridge excitation, delivers ± 10 VDC and 4-20 mA output signals, 4 programmable set points with LED status indicators, optional RS-232 output
Environmental
Overload Limit Load Limit (Side Force, FX or FY) Load Limit (Bending Moment, MX or MY) Load Limit (Axial Torque, MZ) Temperature Range (Operating) Temperature Range (Compensated) Temperature Effect on Output (Maximum) Temperature Effect on Zero Balance (Maximum)
8161 Series:
DIN rail, 35 mm, operates from 12 to 28 VDC, provides 5 or 10 VDC bridge excitation, and delivers ± 5 or ± 10 volts and 4-20 mA. Adjustable zero and span with built-in shunt calibration.
Electrical
Bridge Resistance Excitation Voltage (Recommended) Insulation Resistance Zero Balance
8162 Series:
IP66 (NEMA 4X) enclosure operates from 12 to 28 VDC and provides 5 or 10 VDC bridge excitation, and delivers ± 5 or ± 10 volts and 4-20 mA output via screw terminal connections. Adjustable zero and span with built-in shunt calibration.
Physical
Size Weight Mounting Deflection at Full Scale Capacity Sensing Element Housing Material Electrical Connector Electrical Connector Position
Accessories
Rod End, Model A-20357-3A:
Rod ends are designed to maintain tension loading alignment between a load cell and mounting surface.
Additional Accessories
Rod Ends Load Button Cable A-20357-3A C-20099-3A 8311-01-XXA
Load Button, Model C-20099-3A:
Load buttons are designed to direct applied forces to the measuring axis of a load cell used in compression.
PCB® Automotive Sensors is a dedicated technical sales and support facility, located in Novi, Michigan, USA, devoted to the testing needs of the global transportation market. This team is focused on development and application of sensors and related instrumentation for specific vehicle development test programs, including modal analysis; driveability; ride & handling; component & system performance; durability; road load data acquisition; vehicle and powertrain NVH; legislative testing; quality control; powertrain development; and motorsport. PCB® offers exceptional customer service, 24-hour technical assistance, and a Total Customer Satisfaction guarantee.
Note
All specifications are at room temperature unless otherwise specified.
AS9100 CERTIFIED I ISO 9001 CERTIFIED I A2LA ACCREDITED to ISO 17025
© 2009 PCB Group, Inc. In the interest of constant product improvement, specifications are subject to change without notice. PCB, ICP, Modally Tuned, Spindler, Swiveler and TORKDISC are registered trademarks of PCB Group. SoundTrack LXT, Spark and Blaze are registered trademarks of PCB Piezotronics. SensorLine is a service mark of PCB Group. All other trademarks are properties of their respective owners. AUTO-1621-02A-0309 Printed in U.S.A.
3425 Walden Avenue, Depew, NY 14043-2495 USA Toll-Free in USA 888-684-0014 24-hour SensorLineSM 716-684-0001 Fax 248-478-2094 E-mail
[email protected] www.pcb.com
Visit www.pcb.com to locate your nearest sales office