Esab Enicife-3

ESAB ENiCiFe-3
View more...
   EMBED

Share

  • Rating

  • Date

    December 1969
  • Size

    28.8KB
  • Views

    404
  • Categories

Preview only show first 6 pages with water mark for full document please download

Transcript

OK 92.26 Type Basic Description SMAW ENiCrFe-3 Classifications SFA/AWS A5.11 EN ISO 14172 ENiCrFe-3 E Ni 6182 (NiCr15Fe6Mn) A nickel-based electrode for welding nickel alloys such as Inconel 600 and similar Inconel alloys, cryogenic steels, martensitic to austenitic steels, dissimilar steels, heat-resistant steels and castings with limited weldability. Welding current DC+ Typical all weld metal composition, % C Si Mn Cr Ni Nb Cu Ti Ta Fe 0.03 0.5 6.6 15.8 67 1.7 <0.5 <0.5 <0.3 8.8 12346 Typical mech. properties all weld metal Yield stress, MPa Tensile strength, MPa Elongation A4, % 410 640 40 Charpy V Test temps, °C +20 -196 Impact values, J 100 80 Approvals ABS Sepros UDT ENiCrFe-3 UNA 409820 DIN 1736 Welding parameters N. B. H. Kg weld No. of elec- Kg weld Welding Arc voltage, metal/kg trodes/kg metal/hour current, A V electrodes weld metal arc time 45-70 22 0.63 88 0.9 70-105 23 0.62 57 1.2 90-130 24 0.64 31 2.0 120-170 25 0.64 20 2.7 T. Burn-off time, s/ electrode 50 60 60 68 Diameter, mm 2.5 3.2 4.0 5.0 Length, mm 300 350 350 350 343